Buying Guide Accessories

Best Gimbal for Canon EOS 5D Mark IV

Best Gimbal for Canon EOS 5D Mark IV

Looking for the best gimbals for Canon 5D Mark IV? Here are our top recommended gimbals for your Canon EOS 5D Mark IV.

The Canon EOS 5D Mark IV is a full-frame DSLR camera with a high level of performance. In addition to offering amazing image clarity, a strong and ergonomic design, and high video recording quality in 4k, it also suffers from a significant crop while shooting video in that format.

Its autofocus technology is adequate in terms of effectiveness and dependability in photography, but it performs remarkably well while tracking moving subjects when the video is being recorded. Due to its length and weight, however, this is a cumbersome and inconvenient camera to use while recording videos of yourself or when filming from unusual angles.

Simple, we’ve compiled a list of some of the best gimbal models, together with their characteristics to make your decision a lot easier.

Best Gimbal for Canon EOS 5D Mark IV in 2022

1. DJI RSC 2 

The DJI RSC 2 is made for mirrorless and DSLR cameras, and it can handle weights of up to 6.6 pounds of camera gear. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

The Ronin-SC, this revised gimbal’s predecessor, had motors that were only 25% as powerful as those of the RSC 2. The RSC 2’s foldable design, which enables conversion to underslung mode, is a crucial feature.

Without having to attach or remove anything, you can rotate the gimbal around and utilize it underslung for low-angle pictures because the gimbal head folds down from the gimbal handle. The integrated gimbal handle still includes built-in batteries that can last up to 14 hours.

Additionally, the batteries can be charged while the gimbal is in use by using the handle (barring extremely cold or extremely hot temperatures). The handle can be recharged in around two hours using an 18W fast charger, which is not included. It supports PD and QC 2.0 fast-charging protocols. The gimbal’s foldable form makes it simpler to transport and store.

2. DJI RS 2 Combo 

To enable a more thorough workflow, the DJI RS 2 Pro Combo includes a number of other attachments in addition to the RS 2 gimbal. The DJI Ronin RavenEye Image Transmission System, which enables 330′ of 1080p video transmission from the gimbal with a latency of about 50ms enabling on-set cooperation, is a significant innovation. Two focus gears, a focus motor, a phone holder, and three HDMI cables make up the remaining extras.

With a payload capacity of up to 10 lb, the RS 2 gimbal is an updated version of the Ronin-S gimbal. Monocoque carbon fiber axis arms, a shorter grip handle, and a smaller battery cartridge make it around 25% lighter and more compact while maintaining a 12-hour runtime. The motors are around 20% more powerful and are compatible with cameras such as the ALEXA Mini LF, Canon 1D X Mark III, Blackmagic Pocket 6K, and Sony a7S III. On the DJI website, please refer to the most recent list of compatible cameras and lenses.

3. MOZA AirCross 2 Professional Kit Handheld Stabilizer 

In addition to the AirCross 2 gimbal and all of its normal attachments, Moza’s AirCross 2 Professional Kit also comes with an iFocus-M Wireless Lens Motor, an Arca-Swiss Quick Release Plate, and a shoe-mount Phone Holder. The AirCross 2 has many operating modes, including imaginative settings like Inception mode, and can support loads up to 7 lbs. When you hold the gimbal in different ways, most frequently as you would on a jib, the camera rotates continuously in Inception mode.

The iFocus-M motor is a 15mm rod-mount device that is small, silent, and driven by a connection to one of the gimbal’s CAN ports. It may be adjusted to line up with the focus or zoom ring on your lens, and it can be operated up to 328 feet away with either the gimbal handwheel or an extra Moza hand unit.

The camera is easier to mount and demount with the Arca-Swiss Quick Release Plate, and the Phone Holder may be shoe-mounted to your camera for quick access to the built-in gimbal app.

4. DJI Ronin-SC – Camera Stabilizer

The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.

The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.

The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.

5. DJI Ronin-SC Pro Combo 

The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.

The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.

The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.

7. Zhiyun Weebill S Compact Gimbal Stabilizer

The Zhiyun-Tech WEEBILL-S boasts a more compact size, as well as new functions, and integrates the underslung mode design of its predecessor, the WEEBILL LAB. The underslung mode may be easily switched to thanks to the design of the sling mode, which also improves handling in all other modes.

The stabilizing algorithm and improved motors are additional benefits. The motor torque of the WEEBILL-S is 300% greater, and the response is 50% greater. As a result, you may more easily balance camera/lens combinations like the Canon 5D Mark IV with a 24-70mm zoom lens.

The TransMount Image Transmission Module, a small device designed to elegantly fit beneath the quick release plate of the WEEBILL-S and enable wireless streaming of up to 1080p30 resolution over distances up to 328′, is being introduced alongside the WEEBILL-S as an optional accessory. Using the appropriate receiver modules, up to three devices, including smartphones, tablets, and even professional displays, can be synchronized.

8. Zhiyun Weebill S [Official] 3-Axis Gimbal Stabilizer

The Zhiyun-Tech WEEBILL-S boasts a more compact size, as well as new functions, and integrates the underslung mode design of its predecessor, the WEEBILL LAB. The underslung mode may be easily switched to thanks to the design of the sling mode, which also improves handling in all other modes.

The stabilizing algorithm and improved motors are additional benefits. The motor torque of the WEEBILL-S is 300% greater, and the response is 50% greater. As a result, you may more easily balance camera/lens combinations like the Canon 5D Mark IV with a 24-70mm zoom lens.

The TransMount Image Transmission Module, a small device designed to elegantly fit beneath the quick release plate of the WEEBILL-S and enable wireless streaming of up to 1080p30 resolution over distances up to 328′, is being introduced alongside the WEEBILL-S as an optional accessory.

Using the appropriate receiver modules, up to three devices, including smartphones, tablets, and even professional displays, can be synchronized.

9. Zhiyun Weebill S 3-Axis Handheld Gimbal Stabilizer 

The Zhiyun-Tech WEEBILL-S boasts a more compact size, as well as new functions, and integrates the underslung mode design of its predecessor, the WEEBILL LAB. The underslung mode may be easily switched to thanks to the design of the sling mode, which also improves handling in all other modes.

The stabilizing algorithm and improved motors are additional benefits. The motor torque of the WEEBILL-S is 300% greater, and the response is 50% greater. As a result, you may more easily balance camera/lens combinations like the Canon 5D Mark IV with a 24-70mm zoom lens.

The TransMount Image Transmission Module, a small device designed to elegantly fit beneath the quick release plate of the WEEBILL-S and enable wireless streaming of up to 1080p30 resolution over distances up to 328′, is being introduced alongside the WEEBILL-S as an optional accessory.

Using the appropriate receiver modules, up to three devices, including smartphones, tablets, and even professional displays, can be synchronized.

Corey
About Author

Corey

Freelance journalist Corey has been writing about digital photography since 2006, first as a deputy editor and then as the editor of a variety of photographic journals. Featuring expert product reviews and in-depth features

Leave a Reply

Your email address will not be published.