Accessories Buying Guide

Best Gimbal For Fujifilm GFX 50R

Best Gimbal For Fujifilm GFX 50R

Looking for the best gimbals for Fujifilm GFX 50R? Here are our top recommended gimbals for your Fujifilm GFX 50R.

The Fujifilm GFX 50R is a powerful medium format mirrorless camera that costs far less than competing full-frame mirrorless cameras while providing performance that is comparable to or better than that of the competition. The bigger sensor produces photos that are exceptionally detailed and clear, especially in low-light conditions. Its tiny design, as well as durable qualities, distinguish this as the best mirrorless camera on the market.

Fujifilm’s GFX 50R full-frame camera, equipped with a 51.4-megapixel medium format sensor, produces very high-quality images. It comes with an electronic viewfinder, a 3.2-inch LCD touch display, and two card slots, among other features. This medium format camera is also equipped with a robust body that is both dust and water-resistant.

Below is a list of the most effective image stabilizers for the Fujifilm GFX 50R:

Best Gimbal For Fujifilm GFX 50R

1. Neewer Camera Shoulder Rig

With this compact DSLR Shoulder Rig from Neewer, you can support your small DSLR or mirrorless camera. A rubber shoulder pad, a camera baseplate, 15mm rods, a counterweight, two handgrips, a C-shaped bracket, a top handle, a follow focus, and a matte box are all parts of the rig that have blue highlights.

The baseplate has 1/4″-20 camera screws, 1/4″-20 and 3/8″-16 mounting threads for tripod installation, and is fixed on 15mm rods. The gear-driven follow focus can be mounted on either the right or left side and slides onto the 15mm rods to support a variety of lenses. The matte box is compatible with lenses ranging in diameter from 43 to 77mm, mounts on 15mm rods, and has top and side flags.

The C-shaped bracket provides additional mounting options such as 1/4″-20 and 3/8″-16 accessory threads, and the rubber top handle mounts on top. For handheld pictures, the rubber-padded shoulder rest and movable handgrips offer three points of support. Your rig is balanced by the 2.5 lb counterweight, which is attached to the back of the 15mm rods.

2. NICEYRIG 15mm Shoulder Pad Support System

With this Shoulder Pad from Niceyrig, you can make your handheld DSLR or mirrorless shoulder rig more comfortable. To enable shoulder-mounted usage, the pad can be placed onto a camera rig using optional rod clamps. The thin pad won’t significantly increase the weight of your setup because it just adds 1.6 oz to it.

The aluminum frame of the shoulder pad has numerous 1/4″-20, 3/8″-16, and M4 threads that can be used to attach 15mm rod clamps, battery plates, transmitters, counterweights, or various brackets to further expand your rig. The soft foam shoulder pad fastens into designated slots on the aluminum shoulder pad plate with hook-and-loop fasteners.

To simply add a 1/4″-20 accessory attaching to your 15mm rod configuration, use this Niceyrig 15mm Dual-Rod Clamp. This may be attached to any LWS 15mm support rod setup because it complies with the required 60mm on-center rod clamp spacing and has two independently controlled 15mm rod clamps. A bar with several 1/4″-20 threaded holes spans the two clamps and can be used to connect extra attachments such as articulating arms, double-sided 1/4″-20 screw adapters, cold shoe adapters, and cheese plates.

3. FLYCAM Redking Quick Balancing Video Camera Stabilizer

The flycam Redking lets you follow your subject while achieving fluid, dramatic shots by centering the pan, tilting, and rolling axes around a handle. As you move about and walk, run, climb stairs, etc., it helps to balance and steady the camera horizontally. In most circumstances, you can mount your camera together with a matte box, microphone, or other gear you might require for the shoot because the Redken can support loads up to 15 lbs.

To offer the best stabilization, the bottom base has 16 thin-weight plates that may be added or taken out to achieve the perfect counterbalance for your camera load. To further aid in balancing, the base’s width can be increased. Additionally, the height of the center post can be telescopically adjusted from 21 to 32″ for vertical counterbalance.

4. Flycam Galaxy Dual Arm & Vest with Redking Video Camera Stabilizer

With this B&H-assembled FLYCAM Galaxy Arm and Vest Kit with Redking Camera Stabilizer, you can take smooth motion pictures while relieving stress on your arms. The equipment comes with a Redking video camera stabilizer, a Galaxy universal-fit foam-padded vest, and a Galaxy stabilizer arm.

The cozy vest adjusts with buckles and hook-and-loop straps to fit waists 28 to 60 inches wide and chests 38 to 52 inches wide. The shock-absorbing arm fastens to the vest and may extend to a maximum length of 18″. It can sustain up to 22 lbs. It includes 19 and 22-mm bushings in addition to a normal 16-mm mounting post for the Redking. The Redking camera stabilizer attaches to the post of the arm and can hold a camera rig weighing up to 7.5 lbs. As you run, walk, cycle, or climb, it has an adjustable balance system to keep your shots smooth and steady.

5. FLYCAM Flowline Master Professional Stabilizing Body Support for Camera Gimba (4-12kg/9-27lb)

The body-worn vest support system from FLYCAM called the Flowline Master Stabilizing Accommodate Vest can support camera rigs weighing 8.8 to 26.5 lb. To support the weight of the gimbal rig, the system uses a suspension line, which relieves the strain on your shoulder, neck, and arm muscles and distributes it across your torso instead.

By adjusting a screw in the back of the tension line, you may adjust the tension to the ideal level for your setup. The vest, a support bar, a ratchet knob to prevent slipping, and a 17″ top bar with a 5″ support arm extension make up the system. The vest provides enhanced lower back support that enables you to carry weights further from your body.

It is adjustable for hip sizes ranging from 32 to 49″ and it is designed for use with motorized gimbal stabilizers. For easy storage and movement of the Flowline Master system, a carrying bag is also provided.

6. Flycam HD-3000 Stabilizer with Galaxy Dual Arm & Body Vest Steadycam System (GLXY-AV-HD-3)

This combo combines the Galaxy Arm & Vest, one of FLYCAM’s most cutting-edge body vests, with the FLYCAM HD-3000 Video Camera Stabilizer. The HD-3000 provides for steady pan, tilt, and roll motion as you move in various directions and supports loads up to 8 lbs.

The Galaxy vest has an adjustable waist, chest, and height between the shoulders. It is made of lightweight metal plates and breathable synthetic fabric. The chest size ranges from 38 to 52″, while the waist size can be adjusted from 28 and 60″.

The vest incorporates a dual-spring construction with adjustable spring elasticity, as well as a shock-absorbing arm with several degrees of articulation. Direct attachment of the HD-3000 stabilizer to the shock-absorbing arm’s mounting point is possible.

A Unico quick-release sliding camera platform with a drop-in quick-release plate is included with the HD-3000. With the 16 counterweight plates that are included and the sliding camera platform, you can balance your camera for a more productive workflow. The supplied table clamp gives the stabilizer a mounting point so that it may be balanced and put away when not in use.

About Author


Freelance journalist Corey has been writing about digital photography since 2006, first as a deputy editor and then as the editor of a variety of photographic journals. Featuring expert product reviews and in-depth features

Leave a Reply

Your email address will not be published.