Accessories Buying Guide

Best Gimbal For Fujifilm GFX 50S

Best Gimbal For Fujifilm GFX 50S

Looking for the best gimbals for Fujifilm GFX 50S? Here are our top recommended gimbals for your Fujifilm GFX 50S.

The Fujifilm GFX 50S is the first camera of the company’s new medium format GF series, which debuted earlier this year at Photokina. It makes use of a Medium Format CMOS sensor with a Bayer filter array that has 51.4 megapixels.

It has certain characteristics with its smaller sensor X-series brothers, including classic style and straightforward controls in a well-balanced (though huge) mirrorless body.

Because of its reduced surface area, the sensor of the GFX 50S is less in size than a film medium format camera.

However, it is equivalent in terms of size and pixel count to the current crop of medium format digital cameras available on the market today (with the exception of the Phase One XF and the Hasselblad H6D). The sensor has a surface area that is 1.7 times that of a full-frame camera.

Following are the best image stabilizer for Fujifilm GFX 50S:

Best Gimbal For Fujifilm GFX 50S

1. Neewer Camera Shoulder Rig

With this compact DSLR Shoulder Rig from Neewer, you can support your small DSLR or mirrorless camera. A rubber shoulder pad, a camera baseplate, 15mm rods, a counterweight, two handgrips, a C-shaped bracket, a top handle, a follow focus, and a matte box are all parts of the rig that have blue highlights.

The baseplate has 1/4″-20 camera screws, 1/4″-20 and 3/8″-16 mounting threads for tripod installation, and is fixed on 15mm rods. The gear-driven follow focus can be mounted on either the right or left side and slides onto the 15mm rods to support a variety of lenses. The matte box is compatible with lenses ranging in diameter from 43 to 77mm, mounts on 15mm rods, and has top and side flags.

The C-shaped bracket provides additional mounting options such as 1/4″-20 and 3/8″-16 accessory threads, and the rubber top handle mounts on top. For handheld pictures, the rubber-padded shoulder rest and movable handgrips offer three points of support. Your rig is balanced by the 2.5 lb counterweight, which is attached to the back of the 15mm rods.

2. SmallRig Camera Cage Kit

SmallRig’s compact Professional Camera Cage Kit adds accessory mounting and protection for your Sony a1, a7 IV, or a7S III mirrorless camera. A form-fitting camera cage, two locking side plates, an HDMI cable clamp, a side handle, and a top handle with an accessory mount in the 3/8″-16 ARRI type are all included in the set. The form-fitting aluminum cage has a NATO rail, strap slots, various 1/4″-20 and 3/8″-16 ARRI-style accessory threads, two locking side plates to prevent twisting, and a camera screw that is 1/4″-20 in diameter. It has a number of mounting options and keeps the hot shoe and controls of the camera accessible. The HDMI cable clamp guards against the pulling or detaching of the HDMI cable. The side handle adds additional, comfortable handled support to the side of the cage, while the top handle offers additional shoe mounts and mounting threads.

Sony a7 IV, a7S III, and a1 SmallRig Full Camera Cage

With this compact Full Camera Cage from SmallRig, you can add accessory mounting and protection for your Sony a1, a7 IV, or a7S III mirrorless camera. This form-fitting metal cage features an integrated 1/4″-20 screw for mounting the camera, an anti-twist design with two locking side plates, and padding on the base to prevent scratches. It has a number of mounting options and keeps the hot shoe and camera controls accessible.

The cage features one integrated shoe mount and multiple 1/4″-20 and 3/8″-16 ARRI-style accessory threads for preventing accessories from twisting when mounted on the cage. The cage also has a NATO rail on the side and strap slots for a neck or hand strap that may be purchased separately.

3. SMALLRIG Camera Cage Kit Master Kit

The 2999 camera cage from SmallRig is included in Master Cage Kit for Sony a7S III along with a quick-release top handle, a thin NATO rail, and an HDMI cable clamp. Designed to protect and add accessories to your Sony a7S III, the cage maintains access to camera controls and ports and features a shoe mount, multiple 1/4″-20 and 3/8″-16 accessory mounting threads, and slots for wrist or shoulder straps.

Camera Cage for the Sony a7S III from SmallRig

Your a7S III mirrorless camera may mount accessories and be protected with the compact Camera Cage from SmallRig. This form-fitting metal cage features an integrated 1/4″-20 screw for mounting the camera, an anti-twist design, and padding on the base to prevent scratches. It has a number of mounting options and keeps the hot shoe and controls of the camera accessible.

In addition to one integrated shoe mount and multiple 1/4″-20 and 3/8″-16 accessory threads, the cage features ARRI-style accessory threads for preventing accessories from twisting when mounted on the cage. The cage also has mounting threads on the front for an optional lens adapter as well as a NATO rail on the side. To tighten the camera screw, an Allen wrench is stored on the bottom via a magnet.

4. FLYCAM HD-3000 Handheld Video Camera Stabilizer

With the HD-3000 Video Stabilizer from FLYCAM, you can take smooth, steady video with a range of cameras weighing up to 8 lb. This stabilizer, has a three-axis gimbal and a foam handgrip, making it simple to record handheld video that looks professional. It may be used for panning, tilting, booming, or jogging. The stabilizer weighs only 2.6 lb and is built of lightweight aluminum.

The HD-3000 boasts a tool-free 15.7 to 23.6″ telescopic center post for balancing camera rigs up to 8 lb and a dynamic camera balance platform that enables balancing the camera on its X and Y axes. The included quick-release plate installs on the top plate and has 1/4″-20 and 3/8″-16 screws to mount a variety of cameras.

To guarantee a perfect balance, it comes with sixteen counterweights that stack onto the movable base. To balance the gimbal and to store the built, balanced gimbal while not in use, a table clamp serves as a mounting point.

5. FLYCAM HD-3000 Camera Steadycam Stabilizer 

This FLYCAM bundle combines the HD-3000 Video Camera Stabilizer with a Comfort Arm & Vest that distributes all the weight to your torso and hips for improved stability and simpler operation with the HD-3000. The tension-adjustable extension arm also adds shock-absorbing stability to the HD-3000, in addition to weight distribution. The vest may be adjusted from 28 to 60 inches to fit both men’s and women “waist sizes

The HD-3000 provides for steady pan, tilt, and roll motion as you move in various directions and supports loads up to 8 lbs. A Unico fast-release sliding camera platform with a drop-in quick-release plate is included with the stabilizer. With the 16 counterweight plates that are included and the sliding camera platform, you can balance your camera for a more productive workflow. A mounting point for balancing the gimbal and putting it down when not in use is provided by the accompanying table clamp. This FLYCAM bundle combines the HD-3000 Video Camera Stabilizer with a Comfort Arm & Vest that distributes all the weight to your torso and hips for improved stability and simpler operation with the HD-3000. The tension-adjustable extension arm also adds shock-absorbing stability to the HD-3000, in addition to weight distribution. The vest may be adjusted from 28 to 60 inches to fit both men’s and women “waist sizes

The HD-3000 provides for steady pan, tilt, and roll motion as you move in various directions and supports loads up to 8 lbs. A Unico fast-release sliding camera platform with a drop-in quick-release plate is included with the stabilizer. With the 16 counterweight plates that are included and the sliding camera platform, you can balance your camera for a more productive workflow. A mounting point for balancing the gimbal and putting it down when not in use is provided by the accompanying table clamp.

6. FLYCAM HD-3000 Micro Balancing 60cm/24”

The Flycam HD-3000 Micro Balance Handheld Stabilizer from Proaim lets you take smooth, steady video with a range of cameras weighing up to 8 lb. This stabilizer, has a three-axis gimbal and a foam handgrip, making it simple to record handheld video that looks professional. It may be used for panning, tilting, booming, or jogging. The stabilizer weighs only 2.6 lb and is built of lightweight aluminum.

The HD-3000 boasts a tool-free 15.7 to 23.6″ telescopic center post for balancing camera rigs up to 8 lb and a dynamic camera balance platform that enables balancing the camera on its X and Y axes. The included quick-release plate installs on the top plate and has 1/4″-20 and 3/8″-16 screws to mount a variety of cameras.

To guarantee a perfect balance, it comes with 16 counterweights that stack onto the movable base. A sturdy table clamp serves as the gimbal’s mounting point for balancing and storing the constructed, balanced gimbal when not in use. For storage and transportation, a storage case is also provided.

Corey
About Author

Corey

Freelance journalist Corey has been writing about digital photography since 2006, first as a deputy editor and then as the editor of a variety of photographic journals. Featuring expert product reviews and in-depth features

Leave a Reply

Your email address will not be published.