The Fujifilm XE3 is a very capable mid-range mirrorless camera that is ideal for those who are new to interchangeable lens photography. When you need high-quality photographs or 4K video, it responds swiftly, handles smoothly, and delivers high-quality images and 4K video with minimal effort.
An integrated viewfinder, a touchscreen with intelligent gesture controls, an AF joystick for those who prefer a more classic touch, and Bluetooth to connect to your phone through Wifi are all features of this camera.
Downsides? While the camera does not come with a built-in stabilizer or flash (though a slide-on adaptor is supplied), the microphone input is a non-standard 2.5mm, and the phone app may use to be improved. Despite these faults, the XE3 is still a fun camera to shoot with, and the fact that one of its key competitors is Fujifilm’s own XT20 is instructive.
This camera has excellent video quality, and it can record in 4K. If it is recorded with a gimbal, as described below, the quality is much greater, because stabilization combined with 4K is an incredible combo to record with in terms of video quality and resolution.
Following are the best gimbal for the Fujifilm X-E3:
Best Gimbal For Fujifilm X-E3 in 2022
1. DJI RS 2 Combo
DJI RS 2 Combo - 3-Axis Gimbal Stabilizer for DSLR and Mirrorless Cameras, Nikon, Sony, Panasonic, Canon, Fuji, 10lbs Tested...
- 10lb Tested Payload – At a weight of 2.3 lbs and 10lb tested payload, DJI RS 2 offers the highest weight-to-payload ratio in the industry..Operating Frequency : 2.4000 GHz - 2.4835 GHz. Transmission Power :
The DJI RS 2 Pro Combo includes a number of extra attachments in addition to the RS 2 gimbal to enable a more thorough workflow. The DJI Ronin RavenEye Image Transmission System is a significant upgrade that enables 330′ of 1080p video transmission from the gimbal with a latency of about 50ms enabling on-set collaboration. A focus motor, phone holder, two focus gears, and three HDMI cables are among the additional extras.
A newer version of the Ronin-S gimbal with a payload capacity of up to 10 lb is called the RS 2. Monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, albeit it still has a 12-hour runtime, make it around 25% lighter and more compact.
The motors support cameras like the Blackmagic Pocket 6K, Canon 1D X Mark III, Sony a7S III, and ALEXA Mini LF and are around 20% more powerful. Please refer to the DJI website for the most recent list of compatible cameras and lenses.
2. DJI RSC 2
DJI RSC 2 - 3-Axis Gimbal Stabilizer for DSLR and Mirrorless Camera, Nikon, Sony, Panasonic, Canon, Fujifilm, 6.6 lb Payload,...
- Foldable Design - DJI RSC 2’s foldable design means easy transportation and storage, along with expanded shooting options. When folded, RSC 2 is smaller than a sheet of A5 paper, making it as portable as it is powerful.
Free shipping
The DJI RSC 2 is made for mirrorless and DSLR cameras, and it can handle weights of up to 6.6 pounds of camera gear. Please refer to the DJI website for the most recent list of compatible cameras and lenses.
The Ronin-SC, this revised gimbal’s predecessor, had motors that were only 25% as powerful as those of the RSC 2. The RSC 2’s foldable design, which enables conversion to underslung mode, is a crucial feature.
Without having to attach or remove anything, you can rotate the gimbal around and utilize it underslung for low-angle pictures because the gimbal head folds down from the gimbal handle. The integrated gimbal handle still includes built-in batteries that can last up to 14 hours.
Additionally, the batteries can be charged while the gimbal is in use by using the handle (barring extremely cold or extremely hot temperatures). The handle can be recharged in around two hours using an 18W fast charger, which is not included. It supports PD and QC 2.0 fast-charging protocols. The gimbal’s foldable form makes it simpler to transport and store.
3. DJI Ronin-SC
DJI Ronin-SC - Camera Stabilizer, 3-Axis Handheld Gimbal for DSLR and Mirrorless Cameras, Up to 4.4lbs Payload, Sony, Panasonic Lumix,...
- Lightweight and Compact - Opening possibilities for filmmakers and content creators in almost any situation, Ronin-SC was built to go anywhere.
- Tracks the Action - The Ronin app, and Ronin-SC work together seamlessly to achieve smooth, precise gimbal movement at all times, allowing you to focus more on creating the shot that matches your vision.
Free shipping
The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.
Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.
The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.
The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.
4. DJI Ronin-SC
DJI Ronin-SC 3-Axis Gimbal Stabilizer, Grey
- Three-axis motorized gimbal stabilizer
- Designed for mirrorless cameras
- One-handed operation, 4.4 lb max. Load
- Force mobile smartphone control
The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.
Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.
The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.
The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.
5. Flycam Galaxy Dual Arm & Vest with Redking Video Camera Stabilizer
Flycam Galaxy Dual Arm & Vest with Redking Video Camera Stabilizer (FLCM-GLXY-RK) Professional Stabilization System
- PROFESSIONAL AND STRONG-FEATURED RedKing Stabilizer designed with a Micro-balance mechanism to achieve smooth results.
- ALUMINIUM CONSTRUCTED, WELL BALANCED stabilization system is engineered to support cameras weighing up to 7kg/15.4lb
FLYCAM Galaxy Arm and Vest Kit with Redking Camera Stabilizer, you can take smooth motion pictures while relieving stress on your arms. The equipment comes with a Redking video camera stabilizer, a Galaxy universal-fit foam-padded vest, and a Galaxy stabilizer arm.
The cozy vest adjusts with buckles and hook-and-loop straps to fit waists 28 to 60 inches wide and chests 38 to 52 inches wide. The shock-absorbing arm fastens to the vest and may extend to a maximum length of 18″. It can sustain up to 22 lbs. It includes 19 and 22-mm bushings in addition to a normal 16-mm mounting post for the Redking. The Redking camera stabilizer attaches to the post of the arm and can hold a camera rig weighing up to 7.5 lbs. As you run, walk, cycle, or climb, it has an adjustable balance system to keep your shots smooth and steady.
6. Flycam HD-3000 Stabilizer with Galaxy Dual Arm & Body Vest Steadycam System (GLXY-AV-HD-3)
Flycam HD-3000 Stabilizer with Galaxy Dual Arm & Body Vest Steadycam System (GLXY-AV-HD-3) for Video DSLR Cameras | Free Accessories
- COMFORTABLE, WELL BALANCED and PROFESSIONAL Stabilization System transforms shaky handheld footage into smooth and graceful shots
- COMPACT, PORTABLE, MICRO-BALANCING Stabilizer for the latest DV/HDV/DSLR/Video cameras up to 3.5kg/8lbs
FLYCAM Galaxy Arm and Vest Kit with Redking Camera Stabilizer, you can take smooth motion pictures while relieving stress on your arms. The equipment comes with a Redking video camera stabilizer, a Galaxy universal-fit foam-padded vest, and a Galaxy stabilizer arm.
The cozy vest adjusts with buckles and hook-and-loop straps to fit waists 28 to 60 inches wide and chests 38 to 52 inches wide. The shock-absorbing arm fastens to the vest and may extend to a maximum length of 18″. It can sustain up to 22 lbs. It includes 19 and 22-mm bushings in addition to a normal 16-mm mounting post for the Redking. The Redking camera stabilizer attaches to the post of the arm and can hold a camera rig weighing up to 7.5 lbs. As you run, walk, cycle, or climb, it has an adjustable balance system to keep your shots smooth and steady.
7. FLYCAM Zest Pro Electronic Video Camera Stabilizer
FLYCAM Zest Pro Electronic Video Camera Stabilizer, V-Mount, New Handle, Payload: 5-15kg/11-33lb | Professional Modular Precise Aluminum Steadycam for Film...
- Modular handheld stabilizer For HD broadcast, feature film & all camera stabilization needs; Robust yet light Aluminum Construction holds payload range within 5-15kg/11-33lb
- Camera platform with X-Y adjustments for horizontal balance; Center post with scale markings for vertical balance; 3-axis gimbal for ultra-smooth operation
On the set of your upcoming feature film, use the FLYCAM Gold mount Zest Pro Electronic Video Camera Stabilizer with Vista-II Arm Vest to get steady handheld shots. An ultrasmooth, balanced camera rig for professional applications is created by combining a 3-axis gimbal with ball bearings, a stabilizer arm with a dual-spring design, and a padded vest with adjustable hook-and-loop straps.
