Accessories Buying Guide

Best Gimbal For Nikon D5300

Best Gimbal For Nikon D5300

Looking for the best gimbals for Nikon D5300? Here are our top recommended gimbals for your Nikon D5300.

The Nikon D5300’s AF-S Nikkor 18-140mm f3.5-5.6G ED VR is an update to the D5200’s D5200. The optical low pass filter (OLPF) has been removed from the new model’s 24-megapixel CMOS sensor, resulting in sharper images and a better portrayal of small details.

It also includes a 3.2-inch articulated rear TFT display and sensitivity settings ranging from 100 to 12,800 ISO with expandable to 25600. The company’s original DSLR, the D7100, has the same 39-point AF and metering technology as the current model.

For the Nikon D5300, these are the best image stabilizers to consider:

Best Gimbal For Nikon D5300 in 2022

1. DJI Ronin-S

The DJI Ronin-S is a scalable ecosystem for integrating DSLR and mirrorless cameras into professional-grade workflows; it goes beyond simply being a scaled-down version of the larger Ronin gimbal stabilizers. The Ronin-single-handed S’s form factor allows for lighter camera payloads of up to eight pounds. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

You can manipulate the gimbal with precision using the front trigger, the rear mode button, and the joystick to get the shots you need. When held, the front trigger can lock the gimbal; when touched twice, it can re-center; and when tapped three times, it can activate the selfie mode, which rotates the camera 180 degrees.

To activate three programmable operation profiles with adjustable speed and reaction for various shooting circumstances, press the mode button. If you excel at capturing motion, the Sport mode offers incredibly quick response times and swift gimbal rotations, up to a top speed of 45 mph.

The Ronin-S will fit into a documentary, event, and feature film workflows thanks to its operational versatility, and it can operate for up to 12 hours on a single charge of the battery grip.

2. DJI Ronin-SC 

The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.

The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.

The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.

3. DJI Ronin-SC Pro Combo

With this complete DJI Ronin-SC Pro Combo and Moza Slypod Kit assembled by Dslr Cameras Deal, stabilize your camera and move it. Install the Ronin-SC onto the Slypod for easy setup, flexible movement, and strong camera and focus control for smooth and steady motion shots.

A focus motor, focus wheel, focus motor rod mount, focus gear belt, lens support, extended grip/tripod, camera cables, mounting screws, and a storage case are included in the DJI Ronin-SC Pro Combo.

The Moza Slypod comes with a tabletop tripod, an ergonomic wood handle, a tote case, and a fast-release pan and tilt head. Both the gimbal and the slider are included with USB charging cords, allowing you to start shooting straight away.

4. DJI RS 2 Combo 

The DJI RS 2 Pro Combo includes a number of extra attachments in addition to the RS 2 gimbal to enable a more thorough workflow. The DJI Ronin RavenEye Image Transmission System is a significant upgrade that enables 330′ of 1080p video transmission from the gimbal with a latency of about 50ms enabling on-set collaboration. A focus motor, phone holder, two focus gears, and three HDMI cables are among the additional extras.

A newer version of the Ronin-S gimbal with a payload capacity of up to 10 lb is called the RS 2. Monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, albeit it still has a 12-hour runtime, make it around 25% lighter and more compact.

The motors support cameras like the Blackmagic Pocket 6K, Canon 1D X Mark III, Sony a7S III, and ALEXA Mini LF and are around 20% more powerful. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

5. DJI RSC 2

The DJI RSC 2 is made for mirrorless and DSLR cameras, and it can handle weights of up to 6.6 pounds of camera gear. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

The Ronin-SC, this revised gimbal’s predecessor, had motors that were only 25% as powerful as those of the RSC 2. The RSC 2’s foldable design, which enables conversion to underslung mode, is a crucial feature.

Without having to attach or remove anything, you can rotate the gimbal around and utilize it underslung for low-angle pictures because the gimbal head folds down from the gimbal handle. The integrated gimbal handle still includes built-in batteries that can last up to 14 hours.

Additionally, the batteries can be charged while the gimbal is in use by using the handle (barring extremely cold or extremely hot temperatures). The handle can be recharged in around two hours using an 18W fast charger, which is not included. It supports PD and QC 2.0 fast-charging protocols.

The gimbal’s foldable form makes it simpler to transport and store.

6. Zhiyun Crane 2 [Official] Handheld Gimbal Stabilizer

A 3-axis handheld gimbal stabilizer that supports mirrorless and DSLR cameras up to 7 lb in weight is the Zhiyun-Tech Crane-2. You can shoot for up to 18 hours on the provided batteries by mounting your camera on the accompanying Manfrotto-standard quick-release plate, balancing it, and using it.

The gimbal’s handwheel or an additional remote control for the Crane 2 can operate the accompanying rod-mount mechanical focus motor. It can be positioned to line up with your lens’s focus or zoom ring for follow focus or zoom control. The focus motor can be used with almost all lenses by connecting it to a support rod, USB cable, and two universal lens gear rings that are also included.

7. Zhiyun Crane 2 3-Axis Handheld Gimbal Stabilizer

A 3-axis handheld gimbal stabilizer that can support mirrorless and DSLR cameras weighing up to 7 lb is called the Zhiyun-Tech Crane-2. You can shoot for up to 18 hours on the provided batteries by mounting your camera on the accompanying Manfrotto-standard quick-release plate, balancing it, and using it.

The gimbal’s handwheel or an additional remote control for the Crane 2 can operate the accompanying rod-mount mechanical focus motor. It can be positioned to line up with your lens’s focus or zoom ring for follow focus or zoom control.

The focus motor can be used with almost all lenses by connecting it to a support rod, USB cable, and two universal lens gear rings that are also included.

8. Ikan DS2 Beholder Gimbal & DH7-DK Monitor Kit

This Ikan DS2 Beholder 3-Axis Gimbal and DH7 Monitor Kit are intended for use with DSLR or mirrorless cameras, and it includes the DH7 7″ 4K HDMI on-camera LCD monitor kit, a 7″ articulating arm, the DS2 Beholder 3-axis gimbal to give your shots a smooth cinematic stabilized look, dual-grip handles to give you a comfortable rig.

The monitor kit includes a 1.5′ HDMI to micro-HDMI cable, a 1.5′ HDMI to Mini HDMI cable, a battery charger, a Canon LP-E6 type battery with a suitable plate, and a nice cushioned case. The monitor is fastened to the dual-grip handles using the articulating arm that is included.

With the three 360° spinning brushless motors found in the 3-axis gimbal, your range of motion is virtually unlimited. Additionally, it combines an adaptive PID algorithm and a 32-bit controller with a 12-bit encoder for improved performance.

Corey
About Author

Corey

Freelance journalist Corey has been writing about digital photography since 2006, first as a deputy editor and then as the editor of a variety of photographic journals. Featuring expert product reviews and in-depth features

Leave a Reply

Your email address will not be published.