Accessories Buying Guide

Best Gimbal for Panasonic Lumix S1H

Best Gimbal for Panasonic Lumix S1H

When it comes to still photography, the S1H does not disappoint, offering a remarkable 9 frames per second continuous shooting rate with AF-S or 6 frames per second with AF-C. The camera’s High-Resolution mode may be used to increase the effective resolution from 24MP to 96MP by compositing many consecutive photos together.

This feature is only available in the Pro version of the camera. A Depth from Defocus (DFD) contrast-detection autofocus technology with 225-area coverage, which delivers rapid and precise focusing and subject tracking, is also beneficial for both stills and video. Additionally, sensor-shift image stabilization reduces the impression of camera wobble by 6 stops, allowing for clearer handheld photography.

Apart from its photography capabilities, the S1H is distinguished by its body design, which features a 5.76 million-dot OLED electronic viewfinder with an incredibly high resolution, combined with a 3.2-inch LCD monitor “Tilt-free-angle touchscreen LCD with 2.33 million dots. The magnesium alloy body is weather-sealed to allow for use in tough environments, and it includes a 1.8-inch diameter “On-the-fly evaluation of shooting settings is possible using the top status LCD.

Dual SD memory card slots provide expandable storage capacity, while Bluetooth and Wi-Fi connectivity allows for remote camera operation as well as wireless picture transfer to tablets and smartphones, among other functions.

Below is a list of the most effective picture stabilizers for the Best Gimbal for Panasonic Lumix S1H:

Best Gimbal for Panasonic Lumix S1H in 2022

1. Zhiyun Crane-2 

A 3-axis handheld gimbal stabilizer that can support mirrorless and DSLR cameras weighing up to 7 lb is called the Zhiyun-Tech Crane-2. You can shoot for up to 18 hours on the provided batteries by mounting your camera on the accompanying Manfrotto-standard quick-release plate, balancing it, and using it.

The gimbal’s handwheel or an additional remote control for the Crane 2 can operate the accompanying rod-mount mechanical focus motor. It can be positioned to line up with your lens’s focus or zoom ring for follow focus or zoom control. The focus motor can be used with almost all lenses by connecting it to a support rod, USB cable, and two universal lens gear rings that are also included.

2. Neewer Camera Shoulder Rig

With this compact DSLR Shoulder Rig from Neewer, you can support your small DSLR or mirrorless camera. A rubber shoulder pad, a camera baseplate, 15mm rods, a counterweight, two handgrips, a C-shaped bracket, a top handle, a follow focus, and a matte box are all parts of the rig that have blue highlights.

The baseplate has 1/4″-20 camera screws, 1/4″-20 and 3/8″-16 mounting threads for tripod installation, and is fixed on 15mm rods. The gear-driven follow focus can be mounted on either the right or left side and slides onto the 15mm rods to support a variety of lenses. The matte box is compatible with lenses ranging in diameter from 43 to 77mm, mounts on 15mm rods, and has top and side flags.

5. Zhiyun Crane V2 3-axis Stabilizer Handheld Gimbal 

A 3-axis handheld gimbal stabilizer with 360° rotation along all three axes is the Zhiyun-Tech Crane v2. It allows manual non-stop circular rotation along the tilt and roll axes as well as button-powered continuous rotation along the pan axis.

The Crane contains attachable lens support for long lenses and is made for DSLR and mirrorless cameras weighing up to 3.9 lb, such as the Sony a7S, and Panasonic GH4.

The Crane has three 32-bit MCUs (motor control units) operating in parallel at 4000 Hz, and you can change between modes with the help of a stepless joystick located right in front of you. Without the use of any equipment, cameras attach simply by tightening a simple thumbscrew, and a complete setup takes only a minute.

6. DJI Ronin-SC – Camera Stabilizer, 3-Axis Handheld Gimbal

The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.

The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.

The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.

Corey
About Author

Corey

Freelance journalist Corey has been writing about digital photography since 2006, first as a deputy editor and then as the editor of a variety of photographic journals. Featuring expert product reviews and in-depth features

Leave a Reply

Your email address will not be published.