Accessories Buying Guide

Best Gimbal for Sony 7 IV

Best Gimbal for Sony 7 IV

A number of aspects of the Sony 7 IV improve on its predecessor, the 7 III, with some of these improvements being more substantial than others. For experienced photographers, the increase in resolution from 24 to 33 megapixels will be less significant than the introduction of the new BIONZ XR processor, which provides significant performance gains, notably in autofocusing, over the previous BIONZ processor.

A newly developed tracking autofocus technology, which enhances detection accuracy for human faces and eyes by about 30% and can also track the eyes of birds and animals when capturing stills and videos, is included with the new camera.

Following are the best gimbal for the Sony Alpha 7 IV:

Best Gimbal for Sony Alpha 7 IV in 2022

1. DJI RSC 2 

The DJI RSC 2 is made for mirrorless and DSLR cameras, and it can handle weights of up to 6.6 pounds of camera gear. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

The Ronin-SC, this revised gimbal’s predecessor, had motors that were only 25% as powerful as those of the RSC 2. The RSC 2’s foldable design, which enables conversion to underslung mode, is a crucial feature.

Without having to attach or remove anything, you can rotate the gimbal around and utilize it underslung for low-angle pictures because the gimbal head folds down from the gimbal handle. The integrated gimbal handle still includes built-in batteries that can last up to 14 hours.

Additionally, the batteries can be charged while the gimbal is in use by using the handle (barring extremely cold or extremely hot temperatures). The handle can be recharged in around two hours using an 18W fast charger, which is not included. It supports PD and QC 2.0 fast-charging protocols.

The gimbal’s foldable form makes it simpler to transport and store.

2. DJI RS 2 Combo 

The DJI RS 2 Pro Combo includes a number of extra attachments in addition to the RS 2 gimbal to enable a more thorough workflow.

The DJI Ronin RavenEye Image Transmission System is a significant upgrade that enables 330′ of 1080p video transmission from the gimbal with a latency of about 50ms enabling on-set collaboration.

A focus motor, phone holder, two focus gears, and three HDMI cables are among the additional extras.

A newer version of the Ronin-S gimbal with a payload capacity of up to 10 lb is called the RS 2. Monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, albeit it still has a 12-hour runtime, make it around 25% lighter and more compact.

The motors support cameras like the Blackmagic Pocket 6K, Canon 1D X Mark III, Sony a7S III, and ALEXA Mini LF and are around 20% more powerful. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

3. DJI Ronin-SC 

The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.

The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.

The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.

4. Zhiyun Crane 2S

The Zhiyun-Tech CRANE 2S, a successor to the Crane-2, has been significantly improved to better meet the demands of filmmakers. The CRANE 2S can stabilize large cameras like the Blackmagic Pocket 6K, Panasonic S1H, and Canon EOS 1DX Mark II together with accessories thanks to its new-generation 9th Instune Algorithm, which increases each axis’ responsiveness. (For a complete list of cameras and lenses that are compatible, please see the Zhiyun website.)

The CRANE 2S provides specific mounting locations for an optional Zhiyun-Tech TransMount transmitter in order to facilitate collaborative work. A vertical fast-release mount that enables you to position your camera vertically is another new feature that was added to satisfy the rising demand for social media material. In addition, a brand-new FlexMount technology is employed to mount your camera conventionally.

By using a double-safety system, this technology secures your camera while making installation and setup easier. A two-phase locking design has also improved the axis-locking mechanism for balancing cameras. Additionally, the axis-locking mechanism makes sure that the gimbal parts don’t move while being transported or stored.

5. Zhiyun Crane 2S Combo Crane2S with Grip 3-Axis Handheld Gimbal Stabilizer

The TransMount Mini Dual Grip Lite, a side handle that fastens to the bottom of the gimbal, and the CRANE 2S gimbal are both included in the Zhiyun-Tech CRANE 2S Combo Kit. When this extra grip is installed, two hands can be used to hold the gimbal.

Numerous applications can benefit from this capacity. The second pair of batteries from the kit is also included, giving you a total of two sets of three 18650 batteries. Each set has a 12-hour maximum runtime. You can recharge one set while working on your shoot with the other using the included triple charger.

The highly successful Crane-2’s successor, the Crane-2S, has been improved to better serve the requirements of filmmakers. The CRANE 2S can stabilize large cameras like the Blackmagic Pocket 6K, Panasonic S1H, and Canon EOS 1DX Mark II together with accessories thanks to its new-generation 9th Instune Algorithm, which increases each axis’ responsiveness.

(For a complete list of cameras and lenses that are compatible, please see the Zhiyun website.)

6. Zhiyun Crane M3 Handheld 3-Axis Stabilizer

The CRANE-M3 3-Axis Handheld Gimbal Stabilizer from Zhiyun-Tech is a compact, lightweight, and stylish accessory for action cameras, cell phones, and compact cameras. You can operate your camera with greater freedom for longer periods of time thanks to the compact design, which is also simple to transport.

A sleek white exterior, a 1.22″ full-color OLED display, PD quick charge, eight hours of runtime, and an even faster quick-release baseplate are among the new features. Additionally, an integrated fill light with color filters and adjustable color temperature is included.

The CRANE-M3 has seven modes of operation, including follow, pan-follow, POV, portrait, GO, lock, and Vortex modes, and it may also be manually adjusted if necessary. It offers 360° pan, 309° tilt, and 333° roll rotation. It has a built-in 1150mAh battery that lasts for about eight hours and can be recharged using the USB Type-C connector that is provided. You can also use a power bank to charge the gimbal while using it.

The battery level, Bluetooth/Wi-Fi status, and other information are confirmed on the color OLED display, along with additional functionalities. You can balance the camera and lock the balance position for the utilized camera with the use of scale marks and memory locks.

Corey
About Author

Corey

Freelance journalist Corey has been writing about digital photography since 2006, first as a deputy editor and then as the editor of a variety of photographic journals. Featuring expert product reviews and in-depth features

Leave a Reply

Your email address will not be published.