Accessories Buying Guide

Best Gimbals for Fujifilm X-H1

Best Gimbals for Fujifilm X-H1

Looking for the best gimbals for Fujifilm X-H1? Here are our top recommended gimbals for your Fujifilm X-H1.

The Fujifilm X-H1 is a new flagship compact system camera that replaces the X-T2 and X-Pro2 models as the company’s top-of-the-line compact system camera. With in-body image stabilization (IBIS), the XH1 becomes the first Fujifilm camera to do so.

Depending on the lens that you’re using, the camera may provide up to 5.5 stops of correction. A new film simulation dubbed Eterna, which is suitable for shooting movies, as well as a new F-log video mode, DCI 4K and 1080/120P high-speed support, as well as 200Mbps high-bit-rate recording is among the video enhancements.

It also has a 24-megapixel X-Trans III APS-C sized sensor, an X Processor Pro image processing engine, a 3.69 million dot electronic viewfinder, a 1.04 million dot three-direction tilting LCD screen with additional touchscreen functionality, a 25 percent tougher weather-resistant body, 14 frames per second continuous shooting, and a focal plane shutter with a top speed of 1/8000 sec. It is also available in black and silver.

Following are the Best Gimbals for Fujifilm X-H1:

Best Gimbals for Fujifilm X-H1

$449.00
$499.00
in stock
2 new from $449.00
11 used from $318.74
as of October 5, 2022 10:00 pm
Amazon.com
$279.00
$439.00
in stock
11 new from $279.00
5 used from $229.99
as of October 5, 2022 10:00 pm
Amazon.com
$884.00
$999.00
in stock
7 new from $849.99
14 used from $579.99
as of October 5, 2022 10:00 pm
Amazon.com
$399.00
in stock
4 new from $399.00
1 used from $370.40
as of October 5, 2022 10:00 pm
Amazon.com
$339.00
in stock
2 used from $335.76
as of October 5, 2022 10:00 pm
Amazon.com
$369.00
in stock
2 new from $369.00
as of October 5, 2022 10:00 pm
Amazon.com
$369.00
in stock
2 new from $369.00
as of October 5, 2022 10:00 pm
Amazon.com
$399.00
in stock
1 used from $329.00
as of October 5, 2022 10:00 pm
Amazon.com
Last updated on October 5, 2022 10:00 pm

1. DJI RSC 2

The Ronin-SC, this revised gimbal’s predecessor, had motors that were only 50% as powerful as those of the RSC 2. The RSC 2’s foldable design, which enables conversion to underslung mode, is a key feature.

Without having to attach or remove anything, you can rotate the gimbal around and utilize it underslung for low-angle pictures because the gimbal head folds down from the gimbal handle. The integrated gimbal handle still includes built-in batteries that can last up to 14 hours.

Additionally, the batteries can be charged while the gimbal is in use by using the handle (barring extremely cold or extremely hot temperatures). The handle can be recharged in around two hours using an 18W fast charger, which is not included. It supports PD and QC 2.0 fast-charging protocols. The gimbal’s foldable form makes it simpler to transport and store.

2. DJI Ronin-SC 

The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.

The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.

The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.

3. DJI RS 2 Combo 

The DJI RS 2 Pro Combo includes a number of extra attachments in addition to the RS 2 gimbal to enable a more thorough workflow. The DJI Ronin RavenEye Image Transmission System is a significant upgrade that enables 330′ of 1080p video transmission from the gimbal with a latency of about 50ms enabling on-set collaboration. A focus motor, phone holder, two focus gears, and three HDMI cables are among the additional extras.

A newer version of the Ronin-S gimbal with a payload capacity of up to 10 lb is called the RS 2. Monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, albeit it still has a 12-hour runtime, make it around 25% lighter and more compact.

The motors support cameras like the Blackmagic Pocket 6K, Canon 1D X Mark III, Sony a7S III, and ALEXA Mini LF and are around 20% more powerful. Please refer to the DJI website for the most recent list of compatible cameras and lenses.

4. Zhiyun Crane 2S 

The Zhiyun-Tech CRANE 2S, a successor to the Crane-2, has been significantly improved to better meet the demands of filmmakers. The CRANE 2S can stabilize large cameras like the Blackmagic Pocket 6K, Panasonic S1H, and Canon EOS 1DX Mark II together with accessories thanks to its new-generation 9th Instune Algorithm, which increases each axis’ responsiveness. (For a complete list of cameras and lenses that are compatible, please see the Zhiyun website.)

The CRANE 2S provides specific mounting locations for an optional Zhiyun-Tech TransMount transmitter in order to facilitate collaborative work. A vertical fast-release mount that enables you to position your camera vertically is another new feature that was added to satisfy the rising demand for social media material.

In addition, a brand-new FlexMount technology is employed to mount your camera conventionally. By using a double-safety system, this technology secures your camera while making installation and setup easier. A two-phase locking design has also improved the axis-locking mechanism for balancing cameras. Additionally, the axis-locking mechanism makes sure that the gimbal parts don’t move while being transported or stored.

5. Zhiyun Weebill S

The Zhiyun-Tech WEEBILL-S boasts a more compact size, as well as new functions, and integrates the underslung mode design of its predecessor, the WEEBILL LAB.

The underslung mode may be easily switched to thanks to the design of the sling mode, which also improves handling in all other modes. The stabilizing algorithm and improved motors are additional benefits.

The motor torque and responsiveness of the WEEBILL-S are increased by 300% and 50%, respectively. As a result, you may more easily balance camera/lens combinations like the Canon 5D Mark IV with a 24-70mm zoom lens.

The TransMount Image Transmission Module, a small device designed to elegantly fit beneath the quick release plate of the WEEBILL-S and enable wireless streaming of up to 1080p30 resolution over distances up to 328′, is being introduced alongside the WEEBILL-S as an optional accessory.

Using the appropriate receiver modules, up to three devices, including smartphones, tablets, and even professional displays, can be synchronized.

6. Zhiyun Crane M3 Handheld 

The CRANE-M3 3-Axis Handheld Gimbal Stabilizer from Zhiyun-Tech is a compact, lightweight, and stylish accessory for action cameras, smartphones, and compact cameras. You can operate your camera with greater freedom for longer periods of time thanks to the compact design, which is also simple to transport.

An integrated fill light with color filters and configurable color temperature, a chic white exterior, a 1.22-inch diagonal display, and other new features “Eight hours of runtime, a full-color OLED display, PD quick charging, and an even quicker quick release baseplate.

The CRANE-M3 has seven modes of operation, including follow, pan-follow, POV, portrait, GO, lock, and Vortex modes, and it may also be manually adjusted if necessary. It offers 360° pan, 309° tilt, and 333° roll rotation.

It has a built-in 1150mAh battery that lasts for about eight hours and can be recharged using the USB Type-C connector that is provided. You can also use a power bank to charge the gimbal while using it.

The battery level, Bluetooth/Wi-Fi status, and other information are confirmed on the color OLED display, along with additional functionalities. You can balance the camera and lock the balance position for the utilized camera with the use of scale marks and memory locks.

7. Zhiyun Crane M3 Gimbal

The Zhiyun-Tech CRANE-M3 3-Axis Handheld Gimbal Stabilizer Combo Kit is a tiny, lightweight, and stylish accessory for smartphones, action cameras, and compact cameras. You can operate your camera with greater freedom for longer periods of time thanks to the compact design, which is also simple to transport.

An integrated fill light with color filters and configurable color temperature, a chic white exterior, a 1.22-inch diagonal display, and other new features “Eight hours of runtime, a full-color OLED display, PD quick charging, and an even quicker quick release baseplate. This combo kit comes with both a backpack and a phone mount.

8.ZHIYUN Weebill 2

With a slightly larger size than its predecessor, the Zhiyun-Tech WEEBILL 2 handheld 3-axis gimbal stabilizer can carry up to 7.3 lb and is equipped with an Infineon sensor that enhances stability and responsiveness while enabling more fluid operation.

It sports an integrated 2.9 “flip-out color touchscreen display with adjustable rotation and fold-in functionality when not in use. Without using the associated mobile app, you may use the touchscreen to change settings, see your shot, and choose particular features like panoramic, time-lapse, and motion-lapse.

With appropriate cameras and lenses, a focus control wheel can be used to control electronic focus, aperture, and ISO. Additionally, it can be utilized to operate additional Zhiyun lens motors.

To utilize the accompanying tiny tripod as an underslung handle for low-angle pictures, mount it over the gimbal’s main handgrip. It can also be fastened to the base of the primary handgrip so that it can serve as a stand or extension grip.

The batteries that come with the WEEBILL 2 allow it to operate for up to 9 hours, and they can be fully recharged in about 1.5 hours when using a 15V USB PD fast charger, which is available separately.

Corey
About Author

Corey

Freelance journalist Corey has been writing about digital photography since 2006, first as a deputy editor and then as the editor of a variety of photographic journals. Featuring expert product reviews and in-depth features

Leave a Reply

Your email address will not be published.