Looking for the best gimbals for Sony A9 II? Here are our top recommended gimbals for your Sony A9 II.
On top of the original Sony A9’s 24 Megapixel stacked full-frame sensor with its quiet 20fps electronic shooting, zero blackouts, and low distortion, the Sony A9 II incorporates the newest processing technology for increased performance and a host of new body features.
Mark II inherits a number of features from the a7R IV, including 10fps mechanical bursts, dual UHS-II slots, 5GHz Wifi, USB C, and enhanced weather-sealing, as well as some adjusted control locations. The core resolution, burst speed, buffer, and AF coverage remain unchanged. However, the A9’s viewfinder stays the same in terms of speed.
However, the A9’s wired Ethernet connector runs Gigabit rates, provides complete remote control from unmanned places, and permits 10 banks of FTP settings for separate locations. A new phone software can also convert voice recordings to text and re-embed them into graphics so that they are simpler to identify.
For the Sony A9 II, these are the best image stabilizers to consider:
Best Gimbal for Sony A9 II in 2022
1. DJI RS 2 Combo
The DJI RS 2 Pro Combo includes a number of extra attachments in addition to the RS 2 gimbal to enable a more thorough workflow. The DJI Ronin RavenEye Image Transmission System is a significant upgrade that enables 330′ of 1080p video transmission from the gimbal with a latency of about 50ms enabling on-set collaboration. A focus motor, phone holder, two focus gears, and three HDMI cables are among the additional extras.
A newer version of the Ronin-S gimbal with a payload capacity of up to 10 lb is called the RS 2. Monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, albeit it still has a 12-hour runtime, make it around 25% lighter and more compact.
The motors support cameras like the Blackmagic Pocket 6K, Canon 1D X Mark III, Sony a7S III, and ALEXA Mini LF and are around 20% more powerful. Please refer to the DJI website for the most recent list of compatible cameras and lenses.
2. DJI Ronin-SC
The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.
Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.
The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera.
The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location. Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.
3. Zhiyun Crane M3 Gimbal 3-Axis Handheld Stabilizer
The CRANE-M3 3-Axis Handheld Gimbal Stabilizer from Zhiyun-Tech is a compact, lightweight, and stylish accessory for action cameras, cell phones, and compact cameras. You can operate your camera with greater freedom for longer periods of time thanks to the compact design, which is also simple to transport.
A sleek white exterior, a 1.22″ full-color OLED display, PD quick charge, eight hours of runtime, and an even faster quick-release baseplate are among the new features. Additionally, an integrated fill light with color filters and adjustable color temperature is included.
4. Zhiyun Crane M3 Camera Stabilizer
The CRANE-M3 has seven modes of operation, including follow, pan-follow, POV, portrait, GO, lock, and Vortex modes, and it may also be manually adjusted if necessary. It offers 360° pan, 309° tilt, and 333° roll rotation.
It has a built-in 1150mAh battery that lasts for about eight hours and can be recharged using the USB Type-C connector that is provided. You can also use a power bank to charge the gimbal while using it.
The battery level, Bluetooth/Wi-Fi status, and other information are confirmed on the color OLED display, along with additional functionalities. You can balance the camera and lock the balance position for the utilized camera with the use of scale marks and memory locks.
A Wi-Fi-enabled camera that supports remote zoom, shutter, and video start/stop control can connect to the gimbal over built-in Wi-Fi, or you can use a camera control cable and the USB Type-C connector on the baseplate to power and operate the camera simultaneously.
The camera connects to the free ZY Play mobile app for iOS and Android through built-in Bluetooth to provide additional features. The software contains filmmaking tools like time-lapse, panorama, and slow-motion capture in addition to remote control of various gimbal operations. Without using additional lights, you can use the embedded LED light as a fill light for your subject.