With the Blackmagic Design Studio Camera 4K Pro, you can enhance your 4K broadcast with a powerful studio camera. This newly redesigned tiny and lightweight broadcast camera is ideal for live production and offers a number of choices for recording and broadcasting your video. It is available in both black and white versions.
Carbon fiber reinforced polycarbonate and a huge integrated 7-inch touchscreen viewfinder with an enhanced sunshade are among the upgrades and new features included in the Pro variant. The camera is equipped with an upgraded Micro Four Thirds sensor, which according to BMD performs significantly better in low light thanks to its 13-stop dynamic range and dual native ISO settings of 0db and 18db gain. The Talley light on the top of both cameras is bigger and brighter than the other.
The 7-inch screen has been upgraded to a touchscreen with 2000 nits of brightness. There are three assignable buttons on the rear of the camera, in addition to knobs for Brightness, Contrast, and Peaking settings. The menu is accessed using the touchscreen and is comprised of the familiar and simple-to-navigate menu that you are most likely already accustomed to.
Following are the best image stabilizer for Black Magic Studio Camera 4K Pro:
Best Gimbal For Blackmagic Studio Camera 4K Pro in 2022
1. DJI CP.ZM.00000008.01 Ronin 2 Gimbal Stabilizer Professional Combo
The adaptable DJI Ronin 2 gimbal may be put to a drone, a Steadicam, a vehicle mount, and other devices in addition to being used handheld.
This motorized stabilization device, an improvement over the original Ronin, has a payload capacity of 30 pounds and is suitable for a variety of camera and lens setups. This indicates that it can be used with anything from DSLRs to cinema cameras like the ARRI ALEXA Mini or Sony FS7.
In order to assist you to choose the optimal angle, the Ronin 2 supports underslung, upright, and briefcase operation modes. It has been updated, though, to make switching between upright and underslung modes simple without moving the camera.
Other enhancements include changes to the control software and physical layout, which make it easier to take difficult pictures without sacrificing performance while also making key features more accessible.
2. DJI Ronin-M Gimbal Stabilizer V3 New Version
A camera stabilization solution from DJI called the Ronin-M 3-Axis Handheld Gimbal Stabilizer is intended to allow the user nearly as much freedom as unrestricted handheld shooting without the handshake. The Ronin-M has brushless motors that operate on three axes and is suitable for most camera configurations and weights up to 8 pounds.
one for tilt, one for pan, and one for side-to-side “roll” (maintaining the horizon level). The system has a 105° up/165° down tilt range and a 110° roll range, and it is computer-controlled. The system also offers a control precision of 0.02°, allowing for precise camera motions and stability correction against even extremely small movements.
The gimbal can be utilized in situations when mounting a vehicle or other abrupt motions would render tripods and rigid camera support devices problematic, in addition to handheld photography.
3. Flycam HD-3000 Stabilizer with Galaxy Dual Arm & Body Vest Steadycam System (GLXY-AV-HD-3)
This combo combines the Galaxy Arm & Vest, one of FLYCAM’s most cutting-edge body vests, with the FLYCAM HD-3000 Video Camera Stabilizer. The HD-3000 provides for steady pan, tilt, and roll motion as you move in various directions and supports loads up to 8 lbs.
The Galaxy vest has an adjustable waist, chest, and height between the shoulders. It is made of lightweight metal plates and breathable synthetic fabric. The chest size ranges from 38 to 52″, while the waist size can be adjusted from 28 and 60″.
The vest incorporates a dual-spring construction with adjustable spring elasticity, as well as a shock-absorbing arm with several degrees of articulation. Direct attachment of the HD-3000 stabilizer to the shock-absorbing arm’s mounting point is possible.
A Unico quick-release sliding camera platform with a drop-in quick-release plate is included with the HD-3000. With the 16 counterweight plates that are included and the sliding camera platform, you can balance your camera for a more productive workflow. The supplied table clamp gives the stabilizer a mounting point so that it may be balanced and put away when not in use.
4. DJI Zenmuse Z15-BMPCC 3-Axis Gimbal for Blackmagic Pocket Cinema Camera
Keep the camera level and provide stabilization with the DJI Zenmuse Z15-BMPCC 3-Axis Gimbal for Blackmagic Pocket Cinema Camera, and you can turn a larger multi-rotor UAV, like the S1000, into a platform for expert aerial video and aerial photography.
The Z15-BMPCC offers three operating modes, two of which are suited for aerial video and photo use and one of which is for FPV (first-person view) applications. It has a control angle precision of 0.02°. A dedicated stick on your transmitter (hand-held radio controller) is used to control the gimbal, and the receiver needs at least four open channels that can be used for the gimbal operation.
Every variation of the Z15 Gimbal is made to work with a particular set of cameras and lenses. This version is for the Olympus M.ZUIKO Digital ED 12mm f/2.0 lens on the Blackmagic Pocket Cinema Camera.
Additionally, it is calibrated specifically for this arrangement. Filters, for example, can add weight to the camera or lens, alter the weight distribution, and possibly harm the gimbal.