Looking for the best gimbals for Nikon D3500? Here are our top recommended gimbals for your Nikon D3500.
With an APS-C sensor and an 18-55mm VR zoom lens, the Nikon D3500 is an ideal camera for daily photography. The D3500 has an 11-point focusing system, 5fps burst shooting, 1080/60p video, an easy-to-use Guide Mode, Bluetooth connection, and a battery life that can take about 1500 photos on a single charge.
Even in low light, the D3500’s huge DX-format sensor of 24.2 MP shoots stunningly detailed photographs and Full HD videos. When you combine the rendering ability of your NIKKOR lens with a creative portrait with a clean background blur, you may begin to produce stunning results.
You can see from the list that some of the gimbals are fairly travel-friendly, so choose your criterion of requirement and we are confident that at least one of the gimbals listed below will be a great match.
Best Gimbal for Nikon D3500 in 2022
DJI Ronin-SC - Camera Stabilizer, 3-Axis Handheld Gimbal for DSLR and Mirrorless Cameras, Up to 4.4lbs Payload, Sony, Panasonic Lumix,...
- Lightweight and Compact - Opening possibilities for filmmakers and content creators in almost any situation, Ronin-SC was built to go anywhere.
- Tracks the Action - The Ronin app, and Ronin-SC work together seamlessly to achieve smooth, precise gimbal movement at all times, allowing you to focus more on creating the shot that matches your vision.
Free shipping
DJI Ronin-SC Pro Combo - Camera Stabilizer 3-Axis Gimbal Handheld for Mirrorless Cameras up to 4.4 lbs / 2kg Payload...
- The Ronin-SC stabilizer for mirrorless cameras supports a wide range of cameras and lenses. It has been rigorously tested to support a payload of 4.4 lbs / 2.0 kg while still achieving a smooth, cinematic shot.
Free shipping
Zhiyun Crane 2 3-Axis Handheld Gimbal Stabilizer for DSLR Mirrorless Camera Compatible with Sony A9 A7iii Panasonic Nikon Canon-2021 Version
- 【3.2KG Max Payload】Empowered by the Intune Algorithm System, The Crane 2 supports a max. the payload of 3.2kg, mountable by all models of DSLR and mirrorless cameras on the market
- 【Full-range POV】Crane 2 brings a whole new perspective to POV mode. The full-range 360°synchronous movement on all three axes gives you an immersive experience like using an “intelligent” Steadicam
Zhiyun Crane 2S 3-Axis Handheld Gimbal Stabilizer for DSLR Camera Mirrorless Cameras Professional Video Stabilizer Compatible with Sony Nikon Canon...
- 【Crafted for Perfection】CRANE 2S is highly optimized in motor control algorithms and motor power, and it can handle large cameras such as the BMPCC 6K, Panasonic S1H, EOS 1DX Mark III, etc
- 【Bigger Screen 】The new 0.96" OLED screen offers a bigger vision. With it, you will be able to go through the entire menu within seconds and switch between different modes
MOZA AirCross 2 Professional Kit Handheld Stabilizer with iFocusM Motor Lightweight Gimbal Up to 7Lb Auto-Tuning Intuitive Control Panel 12H...
- 【LIGHTWEIGHT POWERFUL & iFocusM Motor】 :The magnesium-alloy integrated technology allows MOZA AirCross 2 to provide robust performance at just 950g (2 lbs) and can achieve seamless cinematic shots with one hand. Featuring a superior motor with a 3.2kg (7 lbs) payload capacity, the MOZA AirCross 2 is capable of supporting most mirrorless and DSLR cameras on the market, Package come with iFocusM Motor.
MOZA Aircross 2 DSLR Gimbal Stabilizer for Mirrorless Camera 3 Axis up to 7lbs/3.2kg Payload and 12hrs Lightweight Mimic Motion-Control...
- 【Multiple Function&Modes】 Features with the upgrade inception mode 3.0, functions such as angle control, automatic rotation and speed adjustment become available. Once you're ready to vlog, there are plenty advanced shooting modes like mimic motion control, object tracking, sport gear mode, FPV mode allow you to explore.
1. DJI Ronin-SC
DJI Ronin-SC - Camera Stabilizer, 3-Axis Handheld Gimbal for DSLR and Mirrorless Cameras, Up to 4.4lbs Payload, Sony, Panasonic Lumix,...
- Lightweight and Compact - Opening possibilities for filmmakers and content creators in almost any situation, Ronin-SC was built to go anywhere.
- Tracks the Action - The Ronin app, and Ronin-SC work together seamlessly to achieve smooth, precise gimbal movement at all times, allowing you to focus more on creating the shot that matches your vision.
Free shipping
The DJI Ronin-SC Gimbal Stabilizer, a three-axis single-handle stabilized gimbal for small mirrorless cameras weighing less than 4.4 lb, offers numerous enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.
Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.
The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera. The sliding quick release camera plate makes it simple to rebalance your camera after moving to a new location.
Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.
2. DJI Ronin-SC Pro Combo
DJI Ronin-SC Pro Combo - Camera Stabilizer 3-Axis Gimbal Handheld for Mirrorless Cameras up to 4.4 lbs / 2kg Payload...
- The Ronin-SC stabilizer for mirrorless cameras supports a wide range of cameras and lenses. It has been rigorously tested to support a payload of 4.4 lbs / 2.0 kg while still achieving a smooth, cinematic shot.
Free shipping
Ronin-SC was designed to go anywhere, opening opportunities for filmmakers and content producers in practically any circumstance. High-strength composite materials, magnesium and aluminum construction, and high-performance design deliver reliable performance at just 1.1 kg. Ronin-SC can be moved easily and packs up neatly in small areas thanks to its modular, quick setup design.
- Gimbal weight: 1.1kg Dimensions: 220x200x75mm
- Battery life maximum: 11 hours
- Payload/Weight: 2.0 kg
3. Zhiyun Crane 2
Zhiyun Crane 2 3-Axis Handheld Gimbal Stabilizer for DSLR Mirrorless Camera Compatible with Sony A9 A7iii Panasonic Nikon Canon-2021 Version
- 【3.2KG Max Payload】Empowered by the Intune Algorithm System, The Crane 2 supports a max. the payload of 3.2kg, mountable by all models of DSLR and mirrorless cameras on the market
- 【Full-range POV】Crane 2 brings a whole new perspective to POV mode. The full-range 360°synchronous movement on all three axes gives you an immersive experience like using an “intelligent” Steadicam
The DJI Ronin-SC Gimbal Stabilizer is a smaller, lighter, three-axis single-handle gimbal stabilizer built for small mirrorless cameras weighing less than 4.4 lb. It offers significant enhancements over the Ronin-S. Please refer to the DJI website for the most recent list of compatible cameras and lenses.
Even though the Ronin-SC is smaller, it still has a ton of features, improvements to the design, and technological advancements. To produce solid 3D/360° motion shots, the gimbal has stabilization, pan, tilt, and roll control, as well as 360° continuous panning.
The gimbal is incredibly portable and makes it simpler to handle the gimbal with a mounted camera for extended periods of time thanks to its meager 2.4 lb weight. It has two locking modes for storing and balancing your camera. The sliding quick-release camera plate makes it simple to rebalance your camera after moving to a new location.
Simply balance your camera in the balancing lock position, unmount it with the plate, put the gimbal in storage mode, and travel. Once you arrive, take the gimbal out and remount your camera. Once the gimbal is unlocked and turned on, your camera will still be balanced.
4. Zhiyun Crane 2S 3
Zhiyun Crane 2S 3-Axis Handheld Gimbal Stabilizer for DSLR Camera Mirrorless Cameras Professional Video Stabilizer Compatible with Sony Nikon Canon...
- 【Crafted for Perfection】CRANE 2S is highly optimized in motor control algorithms and motor power, and it can handle large cameras such as the BMPCC 6K, Panasonic S1H, EOS 1DX Mark III, etc
- 【Bigger Screen 】The new 0.96" OLED screen offers a bigger vision. With it, you will be able to go through the entire menu within seconds and switch between different modes
The Zhiyun-Tech CRANE 2S, a successor to the Crane-2, has been significantly improved to better meet the demands of filmmakers. The CRANE 2S can stabilize large cameras like the Blackmagic Pocket 6K, Panasonic S1H, and Canon EOS 1DX Mark II together with accessories thanks to its new-generation 9th Instune Algorithm, which increases each axis’ responsiveness. (For a complete list of cameras and lenses that are compatible, please see the Zhiyun website.)
The CRANE 2S provides specific mounting locations for an optional Zhiyun-Tech TransMount transmitter in order to facilitate collaborative work. A vertical fast-release mount that enables you to position your camera vertically is another new feature that was added to satisfy the rising demand for social media material. In addition, a brand-new FlexMount technology is employed to mount your camera conventionally.
By using a double-safety system, this technology secures your camera while making installation and setup easier. A two-phase locking design has also improved the axis-locking mechanism for balancing cameras. Additionally, the axis-locking mechanism makes sure that the gimbal parts don’t move while being transported or stored.
5. Zhiyun Crane 2S Combo Crane2S
MOZA AirCross 2 Professional Kit Handheld Stabilizer with iFocusM Motor Lightweight Gimbal Up to 7Lb Auto-Tuning Intuitive Control Panel 12H...
- 【LIGHTWEIGHT POWERFUL & iFocusM Motor】 :The magnesium-alloy integrated technology allows MOZA AirCross 2 to provide robust performance at just 950g (2 lbs) and can achieve seamless cinematic shots with one hand. Featuring a superior motor with a 3.2kg (7 lbs) payload capacity, the MOZA AirCross 2 is capable of supporting most mirrorless and DSLR cameras on the market, Package come with iFocusM Motor.
The TransMount Mini Dual Grip Lite, a side handle that fastens to the bottom of the gimbal, and the CRANE 2S gimbal are both included in the Zhiyun-Tech CRANE 2S Combo Kit. When this extra grip is installed, two hands can be used to hold the gimbal.
Numerous applications can benefit from this capacity. The second pair of batteries from the kit is also included, giving you a total of two sets of three 18650 batteries. Each set has a 12-hour maximum runtime. You may recharge one set while working on your shot with the other using the provided triple charger.
The highly successful Crane-2’s successor, the Crane-2S, has been improved to better serve the requirements of filmmakers. The CRANE 2S can stabilize large cameras like the Blackmagic Pocket 6K, Panasonic S1H, and Canon EOS 1DX Mark II together with accessories thanks to its new-generation 9th Instune Algorithm, which increases each axis’ responsiveness. (For a complete list of cameras and lenses that are compatible, please see the Zhiyun website.)
6. MOZA AirCross 2 Professional Kit Handheld Stabilizer
MOZA Aircross 2 DSLR Gimbal Stabilizer for Mirrorless Camera 3 Axis up to 7lbs/3.2kg Payload and 12hrs Lightweight Mimic Motion-Control...
- 【Multiple Function&Modes】 Features with the upgrade inception mode 3.0, functions such as angle control, automatic rotation and speed adjustment become available. Once you're ready to vlog, there are plenty advanced shooting modes like mimic motion control, object tracking, sport gear mode, FPV mode allow you to explore.
In addition to the AirCross 2 gimbal and all of its normal attachments, Moza’s AirCross 2 Professional Kit also comes with an iFocus-M Wireless Lens Motor, an Arca-Swiss Quick Release Plate, and a shoe-mount Phone Holder. The AirCross 2 has many operating modes, including imaginative settings like Inception mode, and can support loads up to 7 lbs. When you hold the gimbal in different ways, most frequently as you would on a jib, the camera rotates continuously in Inception mode.
The focus-M motor is a 15mm rod-mount device that is small, silent, and driven by a connection to one of the gimbal’s CAN ports. It may be adjusted to line up with the focus or zoom ring on your lens, and it can be operated up to 328 feet away with either the gimbal handwheel or an extra Moza hand unit.
The camera is easier to mount and demount with the Arca-Swiss Quick Release Plate, and the Phone Holder may be shoe-mounted to your camera for quick access to the built-in gimbal app.
